Return to site
Return to site

Mikrotik Routeros V6.0 X86 (level 6 License) Vmware Image

broken image


MikroTikRouterOS is the stand-alone operating system of MikroTik RouterBOARD hardware. It can also be installed on a PC and will turn it into a router with all the necessary features - routing, firewall, bandwidth, management, wireless access point, backhaul link, hotspot, gateway, VPN server and more.

Mikrotik Routeros V6.0 X86 (level 6 License) Vmware Image. Facilitate maintenance operations, by downloading of initial parameters from the. R a TLA PS PB programming software (1), (for servodrive TLC 63 only) in. Product Range. More options. Good evening, I'm from Brazil, do not speak good English so already sorry errors. I have a server running ESXI 6.0.0 and am having trouble importing the VM provided by mikrotik, I do not know if the way in which I am creating this right, I create a new machine and time to select the HD I choose the option 'use HD already existing 'and select the downloaded file' www.mikrotik.com 'but does not.

The tutorial explains how to install RouterOS on Qemu virtual disk and configure GNS3 software to run such a router. Later, We will use GNS3 to a create simple testing topology with one RoutersOS router connected to emulated Cisco 3725 router.

You can download Mikrotik RouterOS x86 installed on Qemu and VirtualBox images in the Download section here.

Software Prerequisites

  • GNS3 with Qemu or VirtualBox support
  • Qemu or VirtualBox
  • RouterOS ISO image - mikrotik-6.37.5.iso

Virtual Machine Prerequisites

  • i386 compatible architecture
  • minimum 32MB of RAM (maximum supported 2GB)
  • minimum Hard Disk space 64MB
  • Network cards supported by linux v3.3.5 kernel (PCI, PCI-X)

RouterOS x86 Installation

1. Download RouterOS for x86 Architecture

$ wget https://download2.mikrotik.com/routeros/6.37.5/mikrotik-6.37.5.iso

Vmware

2. Create Qemu Virtual Disk and Start Virtual Machine

$ /usr/local/bin/qemu-img create -f qcow2 routeros-6.37.5.img 200M
$ /usr/local/bin/qemu-system-i386 -m 512 -enable-kvm -boot d -cdrom mikrotik-6.37.5.iso routeros-6.37.5.img

Mikrotik Routeros V6.0 X86 (level 6 License) Vmware Image Free

3. Install RouterOS

Use spacebar to select packages that are needed. Then press 'i' to install RouterOS.

Picture 1 - RouterOS Installation

Once RouterOS is installed, you have 24 hours to enter a license key to activate RouterOS Qemu image. The timer stops if router is shutdowned. For this reason, we let GNS3 automatically create the copy of base Qemu image every time is a new RouterOS instance placed on the GNS3 desktop. These independent copy of the base image can be run for total 24 hours time period.

4. Start RouterOS Qemu Disk

After the disk is formatted and packages copied, start RouterOS instance with the command:

$ /usr/local/bin/qemu-system-i386 -m 512 -enable-kvm -boot c routeros-6.37.5.img -nographic -serial telnet::4444,server,nowait

You should be able to login to RouterOS with the telnet command:

$ telnet 127.0.0.1 4444

Username is admin without password set.

5. Connect Qemu image to GNS3

I assume that GNS3 is correctly installed and configured.

a) Start GNS3 and create a new GNS3 project

Picture 2 - Creating GNS3 New Project

b) Configure Qemu guest settings

Navigate to Edit -> Preferences -> Qemu -> Qemu Guest and configure parameters as it is shown on the picture below.

Picture 3 - Qemu Guest Settings

RouterOS Configuration

1. Testing Topology

The topology consists of one RouterOS that connects two Microcore Qemu instances. As we want to test switching and VLANs, both Microcore instances are connected to RouterOS switvchport that are separated by VLANs - VLAN10 and VLAN20.

RouterOS's interface Ethernet1 si connected to Cisco 3725 router emulated by Dynamips. The port will be configured as a trunk port on RouterOS side and as a routed port with two sub-interfaces on Cisco's side.

Picture 4 - Testing Topology

2. Create Bridges for VLAN10 and VLAN20 and Assign Access Ports to Bridges

First, check available Ethernet interfaces.They are six Ethernet interfaces presented in RouterOS console in total.

Mikrotik Routeros V6.0 X86 (level 6 License) Vmware Image Download

Picture 5 - Router Ethernet Interfaces

We are going to create bridges br10 and br20 and assign interface Ethernet2 to the bridge br10 and Ethernet3 to br20.

(level

2. Create Qemu Virtual Disk and Start Virtual Machine

$ /usr/local/bin/qemu-img create -f qcow2 routeros-6.37.5.img 200M
$ /usr/local/bin/qemu-system-i386 -m 512 -enable-kvm -boot d -cdrom mikrotik-6.37.5.iso routeros-6.37.5.img

Mikrotik Routeros V6.0 X86 (level 6 License) Vmware Image Free

3. Install RouterOS

Use spacebar to select packages that are needed. Then press 'i' to install RouterOS.

Picture 1 - RouterOS Installation

Once RouterOS is installed, you have 24 hours to enter a license key to activate RouterOS Qemu image. The timer stops if router is shutdowned. For this reason, we let GNS3 automatically create the copy of base Qemu image every time is a new RouterOS instance placed on the GNS3 desktop. These independent copy of the base image can be run for total 24 hours time period.

4. Start RouterOS Qemu Disk

After the disk is formatted and packages copied, start RouterOS instance with the command:

$ /usr/local/bin/qemu-system-i386 -m 512 -enable-kvm -boot c routeros-6.37.5.img -nographic -serial telnet::4444,server,nowait

You should be able to login to RouterOS with the telnet command:

$ telnet 127.0.0.1 4444

Username is admin without password set.

5. Connect Qemu image to GNS3

I assume that GNS3 is correctly installed and configured.

a) Start GNS3 and create a new GNS3 project

Picture 2 - Creating GNS3 New Project

b) Configure Qemu guest settings

Navigate to Edit -> Preferences -> Qemu -> Qemu Guest and configure parameters as it is shown on the picture below.

Picture 3 - Qemu Guest Settings

RouterOS Configuration

1. Testing Topology

The topology consists of one RouterOS that connects two Microcore Qemu instances. As we want to test switching and VLANs, both Microcore instances are connected to RouterOS switvchport that are separated by VLANs - VLAN10 and VLAN20.

RouterOS's interface Ethernet1 si connected to Cisco 3725 router emulated by Dynamips. The port will be configured as a trunk port on RouterOS side and as a routed port with two sub-interfaces on Cisco's side.

Picture 4 - Testing Topology

2. Create Bridges for VLAN10 and VLAN20 and Assign Access Ports to Bridges

First, check available Ethernet interfaces.They are six Ethernet interfaces presented in RouterOS console in total.

Mikrotik Routeros V6.0 X86 (level 6 License) Vmware Image Download

Picture 5 - Router Ethernet Interfaces

We are going to create bridges br10 and br20 and assign interface Ethernet2 to the bridge br10 and Ethernet3 to br20.

[admin@MikroTik] > /interface bridge add name=br10
[admin@MikroTik] > /interface bridge add name=br20
[admin@MikroTik] > /interface bridge port add interface=ether2 bridge=br10
[admin@MikroTik] > /interface bridge port add interface=ether3 bridge=br20

3. Configure Trunk Port to allow VLAN 10 and VLAN 20 and create Switched Virtual Interfaces - SVI10 and SVI20

[admin@MikroTik] > /interface vlan add vlan-id=10 name=SVI10 interface=ether1 disabled=no
[admin@MikroTik] > /interface vlan add vlan-id=20 name=SVI20 interface=ether1 disabled=no

Note: the term SVI is used in a Cisco world, feel free to change it if you want.

4. Add SVI Ports to Bridges

Mikrotik Routeros V6.0 X86 (level 6 License) Vmware Imagenes

[admin@MikroTik] > /interface bridge port add interface=SVI10 bridge=br10 disabled=no
[admin@MikroTik] > /interface bridge port add interface=SVI20 bridge=br20 disabled=no

Picture 6 - Bridge Ports Configuration

5. Assign IP address to SVI Ports

We currently have 432,249 full downloads including categories such as: software, movies, games, tv, adult movies, music, ebooks, apps and much more. Farm frenzy 3 serial key. This special offer gives you full member access to our downloads. Our members download database is updated on a daily basis.Take advantage of our limited time offer and gain access to unlimited downloads for FREE! That's how much we trust our unbeatable service.

This configuration ensures that intervlan routing betwwen VLAN 10 and VLAN20 can be done by RouterOS.

[admin@MikroTik] > /ip address add interface=SVI10 address=192.168.10.254/24 disabled=no
[admin@MikroTik] > /ip address add interface=SVI20 address=192.168.20.254/24 disabled=no

At this point you should be able to make successful ping between PC1 and PC2.

6. Set password and hostname

[admin@MikroTik] > /password new-password=admin
[admin@MikroTik] > /system identity set name=RouterOS-I

7. Static routing configuration

Mikrotik Routeros V6.0 X86 (level 6 License) Vmware Images

[admin@RouterOS-I] > /ip route add dst-address=10.10.10.10/32 gateway=192.168.10.253

Picture 7 - Routing Table

End hosts PC1 and PC2 Configuration

End hosts are represent by Microcore Linux 3.8.2 installed on Qemu virtual disks. Ethernet interfaces configuration is stored in the file /opt/bootlocal.sh that is started during the boot of Microcore. To save configuration changes, the script /usr/bin/filetool.sh must be called with parameter -b.

Ashampoo Burning Studio 2013 Free Full Version Serial Key Ashampoo Burning Studio 2013 is normally priced at $39.99 per serial number / license key. But we have a good news for Ashampoo Burning Studio 2013 fans, for a very limited time, everyone can get Ashampoo Burning Studio 2013 full version serial key for totally free! Ashampoo burning studio 2013 free serial key.

PC1
tc@box:~$ sudo su
root@tc:# echo 'ifconfig eth0 192.168.10.1 netmask 255.255.255.0 up' >> /opt/bootlocal.sh
root@tc:# echo 'hostname PC2' >> /opt/bootlocal.sh
root@tc:# echo 'route add default gw 192.168.10.254' >> /opt/bootlocal.sh

root@tc:~# /opt/bootlocal.sh
root@PC1:~# /usr/bin/filetool.sh -b

PC2
tc@box:~$ sudo su
root@tc:# echo 'ifconfig eth0 192.168.20.1 netmask 255.255.255.0 up' >> /opt/bootlocal.sh
root@tc:# echo 'hostname PC2' >> /opt/bootlocal.sh
root@tc:# echo 'route add default gw 192.168.20.254' >> /opt/bootlocal.sh

root@tc:~# /opt/bootlocal.sh
root@PC2:~# /usr/bin/filetool.sh -b

Cisco 3725 Configuration

1. Router-on-the-stick Configuration

3725#conf t
3725(config)#interface fastEthernet 0/0
3725(config-if)#no shut
3725(config-if)#exit

3725(config)#interface FastEthernet 0/0.10
3725(config-subif)#encapsulation dot1Q 10
3725(config-subif)#ip address 192.168.10.253 255.255.255.0
3725(config-subif)#no shutdown

3725(config-subif)#int fa0/0.20
3725(config-subif)#encapsulation dot1Q 20
3725(config-subif)#ip address 192.168.20.253 255.255.255.0
3725(config-subif)#no shutdown

2. Loopback configuration

725(config)#interface loopback 0
3725(config-if)#ip address 10.10.10.10 255.255.255.255
3725(config-if)#no shutdown

Testing Connectivity

1. Check if RouterOS does Packet Switching Between VLAN10 and VLAN20 Subnets

Issue the command ping on PC1 to test connectivity between PC1 and PC2.

Picture 8 - RouterOS InterVlan Routing

2. Check if VLAN Tagged Traffic is Transferred via Trunk Port

Ping from PC1 to Cisco 3725 router's IP address 192.168.10.253

Picture 9 - Ping from PC1 to Cisco 3725 Idm for chrome download free.

Picture 10 - Captured Traffic on Cisco 3725 Interface FastEthernet0/0

End.

RouterOS Basic Commands
http://rbmikrotik.blogspot.sk/2011/07/mikrotik-router-os-basic-commands.html

RouterOS x86 Features
http://wiki.mikrotik.com/wiki/Manual:RouterOS_features
http://download2.mikrotik.com/what_is_routeros.pdf

RouterOs Switching
http://wiki.mikrotik.com/wiki/Manual:Switch_Chip_Features
http://wiki.mikrotik.com/wiki/Manual:Interface/Bridge#Bridge_Interface_Setup

RouterOS VLANs
http://wiki.mikrotik.com/wiki/Vlans_on_Mikrotik_environment





broken image
PreviousNext
Cookie Use
We use cookies to improve browsing experience, security, and data collection. By accepting, you agree to the use of cookies for advertising and analytics. You can change your cookie settings at any time. Learn More
Accept all
Settings
Decline All
Cookie Settings
Necessary Cookies
These cookies enable core functionality such as security, network management, and accessibility. These cookies can’t be switched off.
Analytics Cookies
These cookies help us better understand how visitors interact with our website and help us discover errors.
Preferences Cookies
These cookies allow the website to remember choices you've made to provide enhanced functionality and personalization.
Save